enlarge |
Hobart 500487 Handler 125 MIG & Flux Cored 125 Amp Welder |
|
|
Description:
Specs:
-115 VAC, 60 Hz
-Rated output @ 19 VDC: 90 amps @ 20% duty cycle, 63 amps @ 20% duty cycle
-Current range: 30-125 amps
-Max. open circuit voltage: 29 volts
-Wire feed speed range: 0-415 in. per min. (0-500 IPM at no load)
-Amps input at rated load, 60Hz: 20 @ 115V. 2.9 kVA. 2.5 kW.
-Dimensions: 16-7/8"H x 9-7/8"W x 12-1/8"D. 50 lbs.
-Processes: MIG (GMAW) and Flux Cored (FCAW)
-Applications: Farm/ranch, light maintenance and repair, light fabrication Rugged and portable, operates off 115 volt standard household current for maximum versatilityWelds 20 gauge up to 3/16" steel with flux cored wireProven built-in wire feeder with quick-release drive roll leverBuilt-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not weldingFour output voltage settings with wire feed tracking provide quick and easy adjustment for different materials and thicknessesSeparate "fan only" or "purge" setting to purge gas line and set flow rate without wasting wireEasy access to polarity changeover includes storage holes for spare tipsDual groove drive rolls make it easy to switch between .023"/.025" and .030"/.035" wireSelf-resetting thermal overload and motor protectionConversion kit required for MIG weldingIncludes: Basic unit, 8 ft H-9 gun with liner for .023"-.035" wire, (3) 0" contact tips, work clamp w/ 10 ft work cable, 1 lb spool of .030" self-shielding flux cored wire, spool shaft to accommodate 4" spools (optional hub kit available for 8" spools), power cord w/ plug, and weld set-up and parts information chart |
 |
|
|
Related Item:
|
Hobart 500500 Factory Reconditioned Handler 140 MIG & Flux Cored 140 Amp Welder
Specs:115 VAC, 60 Hz,-Rated output @ 20% duty cycle: 90 amps @ 19VDC, 63 amps @ 21VDC,-Current ... |
|
|
|
QUICK LINKS
