DeWalt Cordless Drills
DeWalt Cordless Drills
Purchased in 2006
Strengths: Has plenty of power for the professional.
Weaknesses: Not well balanced, can get heavy if you use it alot.
What Would You Tell the Maker of This Tool: Try to give it more balance. It can get front heavy after a lot of use.
Purchased in 2008
Strengths: I recently bought the dewalt cordless drill pack that included a 18v drill and a cordless impact, Iwas also given an extra battery (still have not recieved)at a contractor show, the only thing that I can find as a strength is that the impact works great for running in screws and wont slow down on lag bolts.
Weaknesses: my first day with the drills was a bit of a disapointment the batteries did not last as long as i was told, had down time when both were dead because i didnt get my spare battery, when i called dewalt they told me to send the batteries back then they would send out new ones that would take about a weak to recieve, not what you want to here when you just spent 450 and now you have down time on your tools.
What You Wanted to Know Before You Bought It: the batteries would last!!
What Would You Tell the Maker of This Tool: improve battery life,stand behind your tools, and dont make your customers wait!!
DEWALT CORDLESS IMPACT WRENC
-
Purchased in 2008
Strengths: I HAVE GIVEN MY CUSTOMERS A VALUE ADDED SERVICE FOR YEARS WITH THIS TOOL, I DO HVAC WORK, PLUMBING, EVERYBODYS HAS A WATER HEATER, WELL TO SAVE THE LIFE OF THAT THING, THE ANODE RODS NEED TO BE CHECKED PERIODICALLY! SO, WHILE IM THERE, A FLAT FEE OF 30-40 DOLLARS, I MEAN WHILE DOING ANOTHER SERVICE CALL YOU DRAIN OUT A GALLON OF WATER,TO RELIEVE PRESSURE, ZIP OUT THAT FROZEN IN PLACE ANODE ROD, MOST CASES YOULL SELL ONE SOME TIME TWO ANODE RODS AS WELL, I MAKE THE EASIEST 100 DOLLARS EVER, DAY IN DAY OUT. THEN WHEN IM DONE LIKE A GOOD SPORT ILL FLUSH WATER HEATER, DEPENDING ON WHO THE CUSTOMER IS, OLD OR YOUNG. I ALSO INSTALL, REPLACE A LOT OF WATER HEATERS THAT ARE READY TO GO. BECAUSE IM LOOKING AT THEM ALL THE TIME. BE CREATIVE. HELP PEOPLE AND SUCCESS WILL COME! WARREN AT PEMBROKECOMPA
Weaknesses: A TOOL THAT MAKES ME SO MUCH MONEY HAS NO WEAKNESS. I CAN SPIN LUG NUTS OFF MY E350 FORD VAN WITH THIS BABY! AND GET THIS ONE, YES ONE HANDED! ONE HANDED, NO AIR HOSES, NO EXTENTION CORDS, THE ONLY THING I COULD POSSIBLE SAY NEGITIVE ABOUT THIS TOOL IS NOT MANY PEOPLE HAVE THEM! ONCE THEY SEE IT PERFORM MIRACLES, LIKE ONE HANDED LUG REMOVAL, I WORRY ABOUT IT, YES I WORRY ABOUT IT, WORRY, YES THATS IT, ITS WEAKNESS IS, OR MINE I WOORY SOME ONES GOING TO STEAL IT. ITS A GOLD MINE, EMAIL ME AND LET ME KNOW WHAT YOU THINK.
What You Wanted to Know Before You Bought It: I WISH I HAD KNOWN ABOUT IT AND ITS USES WHEN I WAS YOUNGER, ID BE A MULTY MILLIONARE BY NOW.
What Would You Tell the Maker of This Tool: I HOPE THEY DO TAKE ME OUT TO LUNCH TO THANK ME FOR THE INCRESED SALES I GENERATED WITH MY STORY. NO IMPROVEMENTS NEEDED, JUST A LITTLE IMAGINATION.
MAYBE A LIST OF OTHER THINGS TO DO WITH IT, PRROFITTABLE AND PRACTICAL AS WELL
DEWALT CORDLESS IMPACT WRENC
-
Purchased in 2008
Strengths: I HAVE GIVEN MY CUSTOMERS A VALUE ADDED SERVICE FOR YEARS WITH THIS TOOL, I DO HVAC WORK, PLUMBING, EVERYBODYS HAS A WATER HEATER, WELL TO SAVE THE LIFE OF THAT THING, THE ANODE RODS NEED TO BE CHECKED PERIODICALLY! SO, WHILE IM THERE, A FLAT FEE OF 30-40 DOLLARS, I MEAN WHILE DOING ANOTHER SERVICE CALL YOU DRAIN OUT A GALLON OF WATER,TO RELIEVE PRESSURE, ZIP OUT THAT FROZEN IN PLACE ANODE ROD, MOST CASES YOULL SELL ONE SOME TIME TWO ANODE RODS AS WELL, I MAKE THE EASIEST 100 DOLLARS EVER, DAY IN DAY OUT. THEN WHEN IM DONE LIKE A GOOD SPORT ILL FLUSH WATER HEATER, DEPENDING ON WHO THE CUSTOMER IS, OLD OR YOUNG. I ALSO INSTALL, REPLACE A LOT OF WATER HEATERS THAT ARE READY TO GO. BECAUSE IM LOOKING AT THEM ALL THE TIME. BE CREATIVE. HELP PEOPLE AND SUCCESS WILL COME! WARREN AT PEMBROKECOMPA
Weaknesses: A TOOL THAT MAKES ME SO MUCH MONEY HAS NO WEAKNESS. I CAN SPIN LUG NUTS OFF MY E350 FORD VAN WITH THIS BABY! AND GET THIS ONE, YES ONE HANDED! ONE HANDED, NO AIR HOSES, NO EXTENTION CORDS, THE ONLY THING I COULD POSSIBLE SAY NEGITIVE ABOUT THIS TOOL IS NOT MANY PEOPLE HAVE THEM! ONCE THEY SEE IT PERFORM MIRACLES, LIKE ONE HANDED LUG REMOVAL, I WORRY ABOUT IT, YES I WORRY ABOUT IT, WORRY, YES THATS IT, ITS WEAKNESS IS, OR MINE I WOORY SOME ONES GOING TO STEAL IT. ITS A GOLD MINE, EMAIL ME AND LET ME KNOW WHAT YOU THINK.
What You Wanted to Know Before You Bought It: I WISH I HAD KNOWN ABOUT IT AND ITS USES WHEN I WAS YOUNGER, ID BE A MULTY MILLIONARE BY NOW.
What Would You Tell the Maker of This Tool: I HOPE THEY DO TAKE ME OUT TO LUNCH TO THANK ME FOR THE INCRESED SALES I GENERATED WITH MY STORY. NO IMPROVEMENTS NEEDED, JUST A LITTLE IMAGINATION.
MAYBE A LIST OF OTHER THINGS TO DO WITH IT, PRROFITTABLE AND PRACTICAL AS WELL
18v XRP
-
Purchased in 2005
Strengths: Can set it for whatever job I need and it works!
Recharges in an hour!
Weaknesses: Have to change out batteries after a couple of hours!
What You Wanted to Know Before You Bought It: Nothing
What Would You Tell the Maker of This Tool: Longer battery life.
Purchased in 2004
Strengths: plumbers are very hard on there tools this one stands up to the test
Weaknesses: the 75$ battery only tasts 2 years
What Would You Tell the Maker of This Tool: make the batterys cost less and last longer
cordless 18volt impact
-
Purchased in 2006
Strengths: The Dewalt cordless 18 volt impact is great. It has a long lasting battery that normally runs for two hours. The tool is also very light, which maks handling it very easy.
Weaknesses: I have yet to find any weakness!
What You Wanted to Know Before You Bought It: Nothing. I am very sastified.
What Would You Tell the Maker of This Tool: I would buy the repersentative lunch and thank them for making such a great product.
Purchased in 2007
Strengths: It's a little short of the grip to the tip, which makes it feel wierd, but the length is an advantage in tight spaces.
Weaknesses: The keyless chuck is poorly designed and catches drivers and bits between the pieces that extend and contract to grip the bits.
14volt
-
Purchased in 2005
Strengths: long lasting charge ,tough, canhandle a beating
Weaknesses: none
What Would You Tell the Maker of This Tool: Not too much they have it under controll
Strengths: color.
Weaknesses: for me i have bout several dewalts in the years i wood not recommend them to a pro guest yet i wood wait five more years, the thing that i found about dewalt tool is the are like product that are in a position of braking into the market Thai need to price and difference the product to sale .their is one dewalt that i do recommend which is the cop saw stand , others companies have put out their version but it is still the best all in all. if you look at their fit and finish of the tool and compare it to others you will see that it is not as good as others . as well the Patton or template of the tools is of older designed tools. it will take time to up grade it cost money to design or r and d new tool design. its about money.
What You Wanted to Know Before You Bought It: the cost to repair the tool is out of aliment with its cost , if you by it for 150.00 and it cost 50.00 to repair you wood be better of buying the better quality tool in the fist place as you need the tool on the job sit not being repaired .for home use it could be ok as it does not see the work loud.
What Would You Tell the Maker of This Tool: me telling them is a wast of time they now the problem with their tools .it is about sales and breaking into the market that is at the hart of their product at this time.
Hardware Tools & Equipment Reviews by Category
Air Compressors
Air Compressors
Belt Sanders
Belt Sanders
Circular Saws
Circular Saws
Cordless Drills
Cordless Drills
Plunge Routers
Plunge Routers


